I’d done a fair bit of coding on my E46 M3 so this wasn’t all new, but very helpful none-the-less for the important bits of magic. Gang:This works on a 2012 (LCI) E92 M3, again by setting ASP_KOMFORT_EINKLAPP = activ in the NFRM module.Thanks for the guide. I had to change KOMFORTSCHLIESSUNG_FB and FH_KOMFORTF_MIT_SUBST in CAS and SPIEGEL_KOMFORT_EINKLAPP in NFRM to aktiv for the mirrors to fold in/out with the fob but on my car the alarm goes off within 30 seconds every time I lock it without pressing the fob button twice to disable the interior sensor. Okaii:I had to change both SPIEGEL_KOMFORT_EINKLAP in the NFRM and KOMFORTSCHLIESSUNG_FB in the CAS module from nicht_aktiv to aktiv to get this to work on my 2008 M3 with Comfort Access. Click “Execute job”.Now a lot of things that you execute you’ll see on the iDrive it will go black.Basicall reboot and the BMW will come up.If your motors are not in your rearview mirrors,it will not black,but you can go ahead and model now.īMW E60 Folding Mirror Coding Video Guide: Go back to NCS Expert,click “F2” change job to select “SG_CODIEREN”–>click “OK”ĩ.

It prompt “FSW_PSW.MAIN” already exists.Do you want to replace it?Click Yes.Ĩ. Then save the change,the file type as all file,name it ”FSW_PSW.MAIN” “BEIKLAPPEN_B_KOMFORTSCHL BEIKLAPPEN_B_KOMFORTSCHL Open the FSW_PSW file with notepad,find below and change it to as right show: Then minimize NCS Expert software,and look for a file called FSW_PSW,a lot of people have dot TRC.Then copy it,and paste it in your backup folder.ħ. Hit F2 to changed job,choice “CODIFRINDEX_LESEN”,then click “OK”->”Read ECU”.It may take a second,you will see a white page with a whole bunch of numbers and letters pull up,then close the white page window.Ħ.

Press “F3” or click the buttom “ZCS/FA ECU”.Then choice your vehicle body stype,here i choice E60,select “CAS” click OK.Ĥ Then you will see it pull up VIN at top,and you need to hit F6 to back.Then click “Process ECU”,and you need to choice the module you want to work with.Here for folding mirror select “KGM”,then click “OK”ĥ.

Launch the NCS Expert software.Click “File”–>”Load profile”–>”Expert Mode”,then click OK.ģ. Connect the coding cable to your vehicle and laptop,then run the INPA software to confirm the battery and ignition is on(There are two black dot),then esc.Ģ. In this guide case,i will take the BMW E60 as a example.ġ. If you have confirmed this feature works for a model year not listed, tell us by writing a reply to this tutorial below.

Bmw ncs expert e60 profiles